63
1.
Go to
Start > Right click on
“My Computer” > Properties
.
2.
Select
the
Hardware Tab
.
3.
Click
Device Manager
.
4.
Double-
click on “
Network Adapters”
.
5.
Right-click on
Wireless Card bus Adapter
or
your specific network adapter
.
6.
Select
Properties
to ensure that all drivers are installed properly.
7.
Look under
Device Status
to see if the device is working properly.
8.
Click “
OK”
.
2 What can I do if my Ethernet connection does not
work properly?
A.
Make sure the RJ45 cable connects with the router.
B.
E
nsure that the setting on your Network Interface Card adapter is “Enabled”.
C.
If settings are correct, ensure that you are not
using a crossover Ethernet cable, not
all Network Interface Cards are MDI/MDIX compatible, and use a patch cable is
recommended.
D.
If the connection still doesn
’t work properly, then you can reset it to default.
3 Something wrong with the wireless connection?
A. Can
’t setup a wireless connection?
I.
Ensure that the SSID and the encryption settings are exactly the same to the
Clients.
II.
Move the 300M MIMO ADSL2+ Broadband Router and the wireless client into
the same room, and then test the wireless connection.
III.
Disable all security settings such as
WEP
, and
MAC Address Control
.
Содержание iB-WRC300N
