iBall Baton iB-WRC300N, Руководство пользователя

Страница: 7 / 70

7
B. Installation Steps
Note:
DO NOT
connect the router to power before performing the installation steps
below.
a. Locate an optimum location for the router. The best place is usually near the center
of the area in which your PC(s) will wirelessly connect.
b. Adjust the direction of the antenna. Normally, upright is a good direction.
Step 1.
Connect the DSL/Cable Modem/Ethernet to the WAN port or ADSL to the RJ11 port
on the router as shown below is the following image.
Broadband WAN ADSL WAN
Step 2.
Insert RJ45 UTP Patch cord one end into the Router LAN Port and another end to the PC LAN
port.
Step 3.
Connect the power adapter one end to the router and other end into an electrical outlet.
Step 4.
Power on your PC and Cable/DSL modem.
Step 5.
When all of the devices boot up completely, make sure that the router's LEDs light
ON as per your connection required.