MAN-072
29
5
- CHECK THAT THE O-RING "H" IS INSTALLED
ON THE STARTER HEAD.
- INSERT THE STARTER DRUM ON THE HEAD
BEING CAREFUL TO PREVENT THE ROTOR
FROM ROTATING AND TO PREVENT THE
BRUSHES FROM FALLING OUT OF THEIR SEAT
(see Fig. 20).
- TORQUE THE 3 SCREWS M5 (see Fig.21).
(SCREWDRIVER)
- CHECK THAT THE STARTER ROTOR
ROTATES FREELY.
- CONNECT THE INPUT WIRING
TO THE STARTER WITH THE SCREW M4
(see Fig.22).
(SCREWDRIVER)
ASSEMBLING THE STARTER
- PLACE THE STARTER IN SEAT (see Fig.23).
PUT SOME OIL ON THE O-RING TO EASE
INSTALLATION N°3 SCREWS TCH M6x35
TORQUE AT 8÷10 Nm ( 70÷90 in-lb )
- INSTALL THE STARTER ON THE CRANKCASE
(N°4 SCREWS M6x35).
- INSTALL THE ADDITIONAL SUPPORT
(N°3 SCREWS M6X25) AND TORQUE THE
SCREW M6X30 ON THE SUPPORT
(see Fig.23).
(5mm ALLEN WRENCH T- TYPE)
TORQUE ALL THE SCREWS AT A 8÷10 Nm
(70 ÷ 90 in-lb)
Fig.20
Fig.21
Fig.22
Fig.23
