MAN-072
28
REPLACEMENT OF THE BRUSH “B”
-
LOOSE THE SCREW M3 “G” (See Fig.16)
- EXTRACT THE BRUSH
- FIX THE NEW BRUSH WITH SCREW M6
(SCREWDRIVER)
CLOSING THE STARTER
- INSERT THE NEW BRUSH SPRING "A" INTO
ITS SEAT.
- INSTALL THE BRUSH.
- KEEP THE BRUSH IN PLACE BY PRESSING
TOWARDS THE OUTER AND CLAMP IT WITH
AN IRON WIRE BENT AS A HOOK.
REPEAT THE SAME PROCEDURE TO INSTALL
THE BRUSH "B" (See Fig.17).
- INSTALL THE ROTOR BETWEEN THE BRUSHES
AND CHECK THAT THEY ARE ALWAYS IN
CONTACT WITH THE CYLINDRIC COPPER
PART OF THE ROTOR, EVEN WHEN THEY ARE
RELEASED. (See Fig.18).
SUGGESTION:
TO IMPROVE THE BRUSHES LIFE, SECURE THE
LITTLE WIRES WITH SILICONE (See Fig.19).
Fig.16
Fig.17
Fig.18
Fig.19
