MAN-072
26
- REMOVE THE DRUM FROM THE STARTER
MOTOR KEEPING THE ROTOR IN ITS SEAT (BE
SURE TO HOLD THE ROTOR ON ITS
TOOTHED SIDE TO PREVENT THE BRUSHES
FROM FALLING OUT FROM THEIR SEAT
(see Fig . 8)
- EXTRACT THE ROTOR FROM THE STARTER
MOTOR HEAD (see Fig. 9)
ATTENTION:
WHEN EXTRACTING THE ROTOR, THE BRUSHES
MAY SPRING OUT FROM THEIR SEATS.
REPLACING THE BRUSH “A”
- UNSCREW THE 2 SCREWS M4 "D" RETAINING
THE PLATE “E” (see Fig.10).
(SCREWDRIVER)
-
REMOVE THE LITTLE RUBBER CAP “F” (see
Fig.11).
(PLIERS)
SUGGESTION:
SLIGHTLY OIL THE TIN PLATE TERMINAL END,
TO MAKE THE EXTRACTION OF THE LITTLE
RUBBER CAP EASIER.
Fig.4
Fig.8
Fig.9
Fig.10
Fig.11
