background image

It is important that all the operations related to installation and regulation be carried out by specialised

staff in accordance with the norms in force. The specific instructions are described in the chapters for

the installer. Before using the appliance, carefully remove the special protective film that protects the

stainless steel or anodized aluminium items.

The oven’s thermal isolation and the grease residue from the work produce smoke and unpleasant

odours during the first few minutes of use. We advise heating the empty oven to maximum temperature

for about 45 minutes at first use.

Use of the gas oven

When using the oven for the first time, set the temperature to its highest level and heat for

about 30 minutes with the oven door closed. Open all windows wide to eliminate any odours

and fumes produced by internal components.

It is something normal, and in case it will occur, wait for the smoke to stop before introducing the food

into the oven.

The oven is fitted with: a rod shelf  for cooking food contained in oven dishes or placed directly on the

rod shelf itself, a drip-tray for cooking sweets, biscuits, pizzas, etc., or for collecting juices and fats

from food cooked directly on the rod shelf.

warnings: do not cook foods on the bottom in the base of the oven.

Fig. 5

ELECTRICAL IGNITION

Open the oven door . Turn the knob anti-clockwise

until the pointer to the maximum power (fig.5).

When the knob is pressed, the electrical ignition

will automatically be activated.

MANUAL IGNITION OF OVEN BURNER

Open the oven door and place a lighted match

close to the hole of the oven bottom plate

(fig. 4A). Turn the knob anti-clockwise until the

pointer to the maximum power (fig.5), and keep

the knob pressed for about 15 seconds to heat

up the thermocouple bulb, and then release it.

If the burner does not remain on, repeat the

operation.

Fig. 4A

keep the knob pressed for about 15 seconds to

heat up the thermocouple bulb, and then release

it.  If the burner does not remain on, repeat the

operation.

To turn off the burner, turn the knob clockwise

to the vertical position marked by the (    ) symbol

(fig. 5).

= Closed
= MIN.
= MAX.

  160°C

  265°C

160

180

200

230

250

265

Oven cooking

Before  use,  heat  the  oven  to  the  desired

temperature.  Upon  reaching  the  desired

temperature, introduce food and check the cooking

temperature, taking care to turn it off 5 minutes

before the end of the cooking time in order to

recover the stored heat.

WARNING: the oven must be used with the oven

door closed.

9

USE

Gas oven

The thermostats are equipped with a safety device which prevents accidental opening.

In addition, if the flame goes out accidentally, the safety of the gas system is assured by a thermocouple

which is tripped automatically and cuts off the flow of gas to the burner concerned.

N.B.: Always make sure that the oven door

is open before lighting the burner.

After making sure that the burner has lit properly,

gently  close  the  oven  door.  To  obtain  the

temperature required, simply turn the pointer of

the  knob  to  the  chosen  number  (fig.  5).

WARNING: 

Do not operate the ignition for

more than 20 seconds. If the burner fails to

ignite, leave the oven door open for at least

1 minute before pressing the knob again.

Содержание IOGFS

















Отзывы: