IAG IOGFS, Инструкция по установке и эксплуатации

Страница: 13 / 16

Removal of oven door
To make cleaning easier, remove the oven door as
follows:
1) open the door halfway and remove the glass
stoppers A , the profile B (as shown in fig. 8)
and the glass C , as shown in fig. 8A.
2) open the oven door completely.
3) flip the hinge hooks "A" outwards (see fig. 8B).
4) shut the oven door slowly until it reaches
hooks "A" , making sure these are locked into
slots "B" of the oven door, as shown in fig.8C.
5) Using both hands, push the oven door lightly
inwards, toenable the door hinges "C" to come
away from the slots "D" (see fig. 8D) and pull
the door towards you until it is released from the
oven. After cleaning it, reposition it correctly
following the abovesteps in the reverse order
and flipping hooks "A" inwardsbefore you shut
the oven door (fig. 8E).
CLEANING AND MAINTENANCE
Cleaning should be carried out when the
appliance is COOL.
Do not use steam cleaners to clean the oven.
Always clean off spillage as quickly as possible to
prevent burning on which will make removal more
difficult. Wash with a clean cloth soaked in hot soapy
water, rinse and dry with a soft cloth. Do not use
abrasives, caustic pastes or sprays, coarse cleaning
pads or powders.
The oven accessories (shelve, grid, oven shelf
carriers) and the oven door also, can be removed
for easier washing, to be done with a mild detergent
solution. The slots in the front of the appliance for
the passage of the air must carefully kept un-
obtructed for an efficient cooling of the unit.
CAUTION: do not use rough or abrasive materials
or sharp metal scrapers to clean the glass doors of
the oven since they may scratch the surface and
cause the glass to break.
CLEANING AND MAINTENANCE
N.B.: BEFORE DOING ANY MAINTENANCE WORK, DISCONNECT THE POWER SUPPLY AND TURN
OFF THE GAS TAP OF THE GAS CYLINDER OR THE GAS SUPPLY MAIN.
13
B
Fig 8A
Fig 8
A
C
A A
A
B
A
Fig. 8C Fig. 8B
C
D
Fig. 8D
A
Fig. 8E