IAG IOGFS, Инструкция по установке и эксплуатации

Страница: 6 / 16

INSTALLING THE APPLIANCE
For the most efficient air circulation, the oven should be fitted according to the dimensions shown in
fig. 2.
FITTING THE APPLIANCE
Fit the appliance into its surround (beneath a work-top or above another appliance) by inserting screws
into the holes that can be seen in the frame of the oven when the door is open (fig. 2).
IMPORTANT
The panels of the adjoining furniture should be heat resistant. Particularly when the adjoining furniture
is made of veneered wood, the adhesives should be able to withstand a temperature of 90°C.
Plastic materials or adhesive which cannot withstand this temperature will become deformed or unstuck.
To comply with safety regulations, once the appliance has been fitted it should not be possible to make
contact with the electrical parts.
All parts which offer protection should be fixed in such a way that they cannot be removed without the
use of a tool.
We recommend that installation, connection and preparation of the cabinet are carried out by a qualified
technician accordingly with the instructions of this booklet and with the installation requirements or
regulations in force in the user's Country
How to remove packing
After having removed internal and external packing ensure that the apparatus is intact and not damaged.
If you are not sure do not use the oven, and call your Retailer.
Some points are protected with a plastic coating.
It is absolutely necessary to eliminate this covering before using the appliance.
The elements used for packing (cardboard, bags, polystyrene, cards) must be kept away from
children because they are a potential source of danger.
Installation, regulation, transformation, maintenance should only be done by qualified personnel
only.
580
fig. 2
6
PREPARATION ON THE CABINET
screw
screw
Screws fitting