i3 International VEO 16, Краткое руководство по эксплуатации

Страница: 49 / 66

Recording Setup
46
For each camera:
Set the Resolution, FPS, Video Quality, Audio for each individual camera.
Click the
RESOLUTION
drop-down menu and select one the offered recording resolutions. Higher resolution results in
 352x240 (CIF)
 704x240 (2 CIF)

740x480 (4 CIF/D1)
 960x480 (960H) - default
Note:
The higher the resolution, the more detailed the video image appears and the larger the video recording size.
Click the
FPS
(frames-per-second) drop-down menu and select one of the offered recording frame rates:
 1 fps, 2 fps, 3 fps, 7fps (default) , 15fps, 30fps (real time)
Note:
The higher the frame rate, the smoother the video appears and the larger the video recording size.
Click the QUALITY drop-down menu and select one of the offered video quality settings:
 LOWEST, LOW, STANDARD, HIGH, HIGHEST (default)
Note:
The higher the video quality, the larger the video recording size.
Click the
AUDIO
drop-down menu and set it to either ON or OFF (default) .
For all cameras:
Set the
PRE- / POST-RECORDING times for all cameras.
Pre-recording time setting specifies the number of seconds appended to the beginning of the video recording. Veo16 DVR will record
for the set number of seconds specified prior to an alarm event or motion detection. The DVR keeps a 15-second video buffer that can
be added to the beginning of recorded video segment in case of an alarm event or motion detection.
Post-recording time setting specifies the number of seconds appended to the end of the video recording after and alarm event or after
the motion has stopped.
Click the PRE RECORDING TIME drop-down menu and select one of the offered pre-recording times: 0 sec, 1 sec, 2 sec, 3 sec, 4 sec,
5 sec
(default) , 10 sec, 15 sec.
Click the POST RECORDING TIME drop-down menu and select one of the offered pre-recording times: 5 sec, 10 sec, 15 sec, 20 sec,
30 sec, 60 sec, 120 sec, 180 sec.
For INTENSIVE MOTION, INTENSIVE ALARM and INTENSIVE MOTION / ALARM RECORD options:
Once selected, a pop-up window will be displayed. Configure
RESOLUTION , FPS (frame rate), Video QUALITY , AUDIO for each
individual camera during NORMAL recording and WHILE IN MOTION and/or ALARM. Then configure PRE- / POST-RECORDING time
for all cameras, click
OK
to apply the settings.
These video recording types allows configuring two sets of recording preferences (Resolution, FPS, and Quality).
NORMAL set of
settings is used for continuous recording when no motion is detected. Higher set of settings, WHILE IN MOTION / ALARM, will be
applied when motion is detected on a camera and/or alarm event is detected.