I:SY E5 ZR F, Перевод оригинальной инструкции по эксплуатации

Страница: 162 / 258

MY23I0a - 42_1.0_29.08.2023
162
Cleaning, maintenance and inspection
7.3.9 Cleaning the saddle
1 Clean the saddle with lukewarm water and a
cloth dampened with soapy water.
2 Rinse off component with water from a
watering can.
7.3.9.1 Cleaning the leather saddle
Leather is a natural product and has similar
properties to human skin. Regular cleaning and
care help to prevent leather dehydrating, fading or
becoming brittle or stained.
1 Remove dirt with a soft, damp cloth.
2 Remove stubborn stains with a leather cleaner.
3 Care for leather saddle after cleaning (see
Section
7.4.11 ).
7.3.10 Cleaning the tyres
1 Clean tyres with a sponge, a brush and soap
cleaner.
2 Rinse off component with water from a
watering can.
3 Remove any embedded chips and small
stones.
7.3.11 Cleaning the spokes and spoke
nipples
1 Clean spokes from the inside to the outside
with a sponge, brush and soapy water.
2 Clean rim with a sponge.
3 Rinse off component with water from a
watering can.
4 Care for spoke nipples after cleaning (see
Section
7.4.13 ).
7.3.12 Cleaning the hub
1 Put on protective gloves.
2 Remove dirt from hub with a sponge and soapy
water.
3 Rinse off component with water from a
watering can.
4 Wipe off oily dirt with a degreaser and a cloth.
7.3.13 Cleaning the switching elements
1 Clean gear shift and shift cables with water, a
brush and dish-washing detergent.
2 Rinse off component with water from a
watering can.
7.3.14 Cleaning the SRAM AXS rear
derailleur

Clean all derailleur components with a damp
cloth.
Notice
The battery will be permanently damaged if water
enters the rear derailleur battery or the battery
mount.

If fitted, remove the rear derailleur battery from
the SRAM rear derailleur and insert the battery
separator into the rear derailleur before
cleaning.

Never immerse the rear derailleur in water.
 Never use acidic or degreasing agents on the
electrical components.
 Never use chemical cleaning agents or
solvents as they can destroy the plastic
components.