i-SENS i-Smart 300, Руководство оператора, Страница: 100 / 107

9. Specification
9-1
i-Smart 300 Blood Gas Analyzer
Operating Specifications
Measured
Parameters

Measured Parameters
Parameter Unit
Reportable
Range
Measuring
Range
Resolution
pH 6.500 ~ 8.000 6.000 ~ 8.500 0.001
p CO
2
mmHg 5.0 ~ 150.0 0.0 ~ 250.0 0.1
p O
2
mmHg 5 ~ 700 0 ~ 800 1
c Na + mmol/L 80 ~ 200 20 ~ 250 1
c K + mmol/L 1.0 ~ 20.0 1.0 ~ 60.0 0.1
c Ca 2+ mmol/L 0.25 ~ 5.00 0.25 ~ 15.00 0.01
c Cl - mmol/L 50 ~ 150 20 ~ 250 1
Hct % 10 ~ 70 5 ~ 75 1
 Sample types: whole blood
 Anticoagulant: heparin
 Sample volume:
80 μL
 Sample introduction method: aspiration
 Sample analysis time: 50 seconds
 Sample analysis temperature: 37.0 ± 0.2°C
 Measuring principle: electrochemical (potentiometry,
amperometry, conductometry)
 Calibration : automatic or manual
Environmental
Conditions
 Operating location: indoors on a flat surface
 Operating temperature: 15 ~ 35°C
 Operating humidity: 5 ~ 85% (relative humidity)
 Operating altitude: under 3,000 m
 Power supply: 100 ~ 240 Va.c., 50/60 Hz