background image

28   www.i-sens.com

www.i-sens.com 29

Step 8
Obtain a blood sample using the 

lancing device. Place the device against 

the pad of the finger. The best puncture 

sites are on the middle or ring fingers. 

Press the release button. Remove the 

device from the finger. Wait a few 

seconds for a blood drop to form. You need a minimum volume 

of 0.4 microliter for blood glucose test with CareSens PRO test 

strip.  (Actual size of 0.4 μL:    )

Applying Blood Sample

Step 7
Insert a test strip with 

the contact bars facing 

upwards into the meter’s 

test strip port. Push the 

strip in gently until the 

meter beeps. Be careful 

not to bend the test strip. 

The  

  symbol will 

appear on the screen.

Preparing the Meter and Test Strip

Blood Glucose Testing

Step 5
The lancing device has six puncture 

depth settings (0 for a shallow 

puncture, 5 for a deeper puncture). 

Choose a depth by rotating the top 

portion of the adjustable tip until the 

desired number aligns with the arrow.

Step 6
To cock the lancing device, hold the 

body of lancing device in one hand and 

pull the sliding barrel with the other 

hand. The device is loaded when you 

feel a click and the load confirmation  

window turns red.

Note:

 The skin depth to get blood samples will vary for 

various people at different sample sites. The lancing device's 

adjustable tip allows the best depth of skin penetration to 

get an adequate sample size. 

Note:

 

0 = a shallow puncture for softer skin

5 = a deeper puncture for thick or calloused skin

Содержание CareSens PRO






























Отзывы: