42 www.i-sens.com
www.i-sens.com 43
Setting the Alarm Function
Step 1
Turning the PP2 alarm On
Without inserting a test strip,
press and hold the
◀
button
for 3 seconds to set the post-
meal alarm.
'PP2', the bell ( ) symbol and
'On' will be displayed. The screen
will then automatically change
to the memory recall mode. At
this time, the bell ( ) symbol,
indicating that the PP2 alarm has
been set, will be displayed on
the screen.
Four types of alarms can be set in the CareSens PRO Meter: one
post-meal alarm (PP2 alarm) and three time set alarms (alarm1-
3). The PP2 alarm activates 2 hours after setting the alarm. The
alarms ring for 15 seconds and can be silenced by pressing any
button or by inserting a test strip.
Setting the Post-meal Alarm (PP2 alarm)
Step 1
Press any
button to turn the meter on. The current
date and time will be displayed on the bottom of
the screen followed by the 1 day average value
and the number of the test results saved within the
current day.
Viewing Test Results Stored in Memory
Step 2
Use the
▶
button to scroll
through the test results,
starting from the most
recent and ending with the
oldest.
Press the
◀
button to
return to the results seen
previously.
After checking the stored test results, press the
S
button to
turn off the meter.
The number of tests
within the current day
◀
button
▶
button
Note:
The PP2 alarm will automatically turn off if the meter's time
setting is adjusted to more than two hours before or just past
the currently activated PP2 alarm time.
Note:
The control solution test results saved with the symbol will
be displayed with the symbol when you review the stored
test results.
