.
(PTZ part)
The camera does not
face the position set.
・The camera may be
out of orientation
from the set position.
・The position is
corrected when
position refresh is
executed. When
position refresh is set
with the schedule
function, the camera
direction deviation
can be corrected
periodically. In some
cases, reset the
preset position.
User manual
(PTZ part)
Camera stops during
PAN/TILT operation
and makes mechanical
sounds.
・The camera may have
been misaligned.
・In the [Initialization]
tab of the Advanced
menu, refresh the
positions.
User manual
(PTZ part)
Camera automatically
rotates
・Noise may have an
effect.
・Check for external
noise.
User manual
・Position refresh
operation may be
performed
automatically to
increase the position
accuracy of PAN,
TILT, and ZOOM at
low temperature
startup. However,
this is not a failure.
-
-
Cannot be accessed
from a Web browser
・Are cables of
category 5e or higher
connected to the
network connector?
・Connect a cable with
Category 5e or higher.
Operation Manual
Installation
9. Other
9.17 Troubleshooting
52
