24
25
6.2 Troubleshooting
AC power failure:
This may occur if your security system is accidentally unplugged or if there has been a mains power
cut. If a full power failure occurs, please contact your electric company to find out the source of the
problem. The back-up battery will continue to run the system for approximately 6 hours.
System battery failure:
This may occur if the emergency back-up battery has been drained and needs to be replaced. If AC
power is not restored, the low battery symbol will flash indicating that the Smart Panel back-up bat
-
tery is running low. The back-up battery should be replaced once the low battery symbol appears.
Sensor failure:
This may occur if a sensor is not communicating with the Smart Panel. It is necessary for you to
ensure the House Security Code dipswitch and jumpers of the sensors are set correctly to the Smart
Panel.
7.1 Product Information
Wireless systems are reliable and tested to high standards; however, it is important to consider that
there are some limitations due to their transmitting power and range:
- Receivers may be blocked by radio signals occurring on or near operating frequencies, regardless of
the code selected.
- A receiver can only respond to one transmitted signal at a time.
- Wireless equipment should be tested regularly to determine whether there are sources of interfe
-
rence and to protect against faults.
7.2 Specifications
7.2.1 Smart Panel
Power source:
AC adaptor
Back up power:
9V alkaline battery x1 pc
Sensor numbers:
Unlimited
House Code:
4 Jumpers
Operating frequencies:
868.35 MHz +/-0.5 MHz
Siren output:
120 dB (Duration-adjustable)
7.2.2 Key Fob Remote Control
Power source:
12V alkaline battery x 1 pc
RF working transmission frequency: 868.35 MHz +/-0.5 MHz
House Code:
4 Jumpers
Wireless range to Smart Panel:
<65 meters (open area)
7.2.3 Door/Window Sensor
Power source:
AAA alkaline battery 1.5V x 2 pcs
RF working transmission frequency: 868.35 MHz +/-0.5 MHz
House Code:
4 Jumpers
Zone Code: Pin header:
8 pin
Wireless range to Smart Panel:
<250 metres (open area)
7.2.4 Motion Sensor
Power source:
9V alkaline battery x1 pc
RF working transmission frequency: 868.35 MHz +/-0.5 MHz
PIR detection angle:
<110 Degree (@9VDC)
PIR detection range:
“H”:< 15M “M”:< 6M “L”:< 4M
House Code:
4 Jumpers
Zone Code:
Pin header: 8 pin
Wireless range to Smart Panel:
<250 meters (open area)
Power saving timer:
3 minutes
7.2.5 Auto Dialler
Power source:
AC Adaptor
Back up power:
AA alkaline battery x 4 pcs
House Code:
4 Jumpers
Operating frequencies:
868.35MHz +/-0.5MHz
