Hyundai KONA 2021, Руководство пользователя

Страница: 209 / 686

05
5-59
Windshield wipers
Operates as follows when the ignition
switch is in the ON position.
/MIST : For a single wiping cycle,
move the lever down ( )
or up (MIST) and release it.
The wipers will operate
continuously if the lever is
held in this position.
O/OFF : Wiper is not in operation.
---/INT : Wipers operate intermittently
at the same wiping intervals.
Use this mode in light rain or
mist. To vary the speed setting,
turn the speed control knob.
1/LO : Normal wiper speed
2/HI : Fast wiper speed
Information
If there is heavy accumulation of snow
or ice on the windshield, defrost the
windshield for about 10 minutes, or until
the snow and/or ice is removed before
using the windshield wipers to ensure
proper operation.
If you do not remove the snow and/or ice
before using the wiper and washer, it may
damage the wiper and washer system.
AUTO (Automatic) control
(if equipped)
OOS047322L OOS047322L
Rain Sensor Rain Sensor
The rain sensor located on the upper end
of the windshield glass senses the
amount of rainfall and controls the
wiping cycle for the proper interval. The
wiper operation time will be
automatically controlled depends on
rainfall.
When the rain stops, the wiper stops.
To vary the sensitivity setting, turn the
sensitivity control knob (1).
If the wiper switch is set in AUTO mode
when the ignition switch is in the ON
position, the wiper will operate once to
perform a self-check of the system.
WARNING
To avoid personal injury from the
windshield wipers, when the engine
is running and the windshield wiper
switch is placed in the AUTO mode:
• Do not touch the upper end of the
windshield glass facing the rain
sensor.
• Do not wipe the upper end of the
windshield glass with a damp or wet
cloth.
• Do not put pressure on the
windshield glass.
• Set the wiper switch to the OFF
position when the wiper is not in use.
005_OS_ENG.indd 5-59 2020-12-24 1:23:48