Hyundai KONA 2021, Руководство пользователя

Страница: 668 / 686

09
9-101
WARNING
• Do not apply any external impact on
the DPF system. It may damage the
catalyst, which is equipped inside
the DPF system.
• Do not arbitrarily modify or
manipulate the DPF system by
redirecting or lengthen the exhaust
pipe. It may adversely impact the
DPF system.
• Avoid contact with the drained water
from the exhaust pipe. The water is
slightly acid and harmful to skin. If
contacted, thoroughly wash it.
• Any arbitrary manipulation or
modification of the DPF system may
cause a system malfunction. The DPF
system is controlled by the complex
device.
• Wait for the DPF system to cool down
before the maintenance service, as
it is hot due to the heat generation.
Otherwise, it may case a skin burn.
• Add only the specified urea solution,
when your vehicle is equipped with
the urea solution system.
• The urea solution system (i.e. urea
solution nozzle, urea solution pump,
and DCU) operates for approximately
2 minutes more to eliminate the
remaining urea solution inside, even
after the ignition switch is pressed
to the OFF position. Before the
maintenance service, make sure
that the urea solution system is
completely turned OFF.
• The poor urea solution or the
unauthorized liquids may damage
the vehicle components, including
the DPF system. Any unverified
additives in the urea solution may
clog the SCR catalyst and cause
other malfunctions, which require
the expensive DPF system to be
replaced.
• When the urea solution contacts
with the eyes or the skin, you should
thoroughly wash the contaminated
skin area.
• When you swallow the urea solution,
thoroughly rinse your mouth and
drink a lot of fresh water. Then,
immediately consult a doctor.
• When your cloth is contaminated
with the urea solution, immediately
change your cloth.
• When you have an allergic reaction
to the urea solution, immediately
consult a doctor.
• Do not allow a child to contact the
urea solution.
• Wipe off any urea solution spillage
with water or cloth. When the urea
solution is crystalized, wipe it off
with the sponge or the cloth, which
is dampened in the cold water. When
the urea solution spillage is exposed
in the air for an extended period
of time, it is crystalized in white,
damaging the vehicle surface.
• The urea solution is not the fuel
additives. Thus, it should not be
injected to the fuel tank. Otherwise,
it may damage the engine.
• The urea solution is the aqueous
solution, which is inflammable, non-
toxic, colorless and odorless.
• Store the urea solution tank only in
the well-ventilated locations. When
the urea solution is exposed to the
hot temperature at approximately
50°C for an extended period of time
(i.e. under the direct sunlight), the
chemical decomposition may occur,
emitting the ammonia vapor.
009_OS ENG.indd 9-101 2021-01-05 3:14:40