6.7.1.2.
To start the machine;
6.7.1.2.1.
Take off the bar cover.
6.7.1.2.2.
Make sure the bar is not touching the ground or any other object.
6.7.1.2.3.
Disengage the chain brake (5) by pulling the front hand guard towards the
front handgrip.
6.7.1.2.4.
Hold the chain saw firmly with both hands.
6.7.1.2.5.
Press the safety button (6) and then the switch (7).
6.7.2.
Stopping the machine (Fig 3).
6.7.2.1.
To stop the machine;
6.7.2.1.1.
Release the switch (7).
6.7.2.1.2.
Lift the tab (1a) and pull out the battery (1).
6.8.
Operating modes and work techniques.
6.8.1.
Do not use the machine without having read the instructions carefully. Become acquainted
with the controls and the proper use of the machine. Learn how to stop the motor quickly.
6.8.2.
Keep in mind that the operator or user is responsible for accidents or hazards occurring to
other people or their property.
6.8.3.
Always wear suitable clothing when using the machine. Your dealer can provide you with all
the information on the most suitable accident-prevention devices to guarantee your safety.
Wear anti-vibration gloves. All the above-mentioned precautions do not however guarantee
the prevention of certain risks – i.e. Raynaud’s phenomenon or Carpal tunnel syndrome. For
operators who use this machine for prolonged periods, it is therefore recommended to have
periodic check-ups on the hands and fingers. If any of the above mentioned symptoms should
appear, please contact a physician immediately.
6.8.4.
Work only in daylight or good artificial light.
6.8.5.
Take utmost care when working near metal fences.
6.8.6.
Take care not to hit the bar hard against foreign objects or flying debris caused by the
movement of the chain.
6.8.7.
Stop the motor and remove the battery from its compartment.
6.8.7.1.
Whenever you leave the machine unattended;
6.8.7.2.
Before cleaning, checking or servicing the machine;
6.8.7.3.
After striking a foreign object. Inspect the machine for any damage and make repairs
6.8.7.4.
before restarting it again;
6.8.7.5.
If the machine begins to abnormally vibrate immediately look for the cause of the
vibrations and take all necessary steps to stop the vibration. If you cannot find the cause
take your machine to your local dealer.
6.8.7.6.
When the machine is not in use.
When you release the switch, the safety button is also released and the engine
stops.
For your safety and that of others.
Page 14
Rev 2
Содержание HYC36LI
Страница 1: ......
