Hyundai HYC36LI, Руководство пользователя

Страница: 17 / 24

7. MAINTENANCE
7.1. General.
7.1.1. After each use, remove the battery from its compartment and check for damage.
7.1.2. Correct maintenance is essential to maintain the original efficiency and safety of the
machine over time.
7.1.3. Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition.
7.1.4. Never use the machine with worn or damaged parts. Damaged parts are to be replaced and
never repaired.
7.1.5. Only use original spare parts. Parts that are not of the same quality can seriously damage
the equipment and compromise safety.
7.2. Motor cooling.
7.2.1. To avoid overheating and damage to the motor, always keep the cooling air vents clean and
free of sawdust and debris.
7.3. Chain brake.
7.3.1. Regularly check the effectiveness of the chain brake.
7.4. Chain catcher device.
7.4.1. This device, built into the casing, is an important safety device that restrains uncontrolled
movements of the chain if it breaks or slackens.
7.5. Nuts and screws.
7.5.1. Periodically check that all the nuts and screws are securely tightened and the handgrips are
tightly fastened.
7.6. Sharpening the blade.
7.6.1. Sharpening is necessary when;
7.6.1.1. The sawdust looks like dust.
7.6.1.2. Cutting becomes more difficult.
7.6.1.3. The cut is not straight.
7.6.1.4. Vibrations increase.
During maintenance, remove the battery from its compartment.
Use protective gloves when handling the bar and chain.
Keep the bar protection devices on, except when intervening directly on the bar or
the chain.
Never dispose of oils or other polluting materials in unauthorised places.
For your safety and that of others you must follow the following instructions.
Make sure that the battery has been removed.
To ensure that the chain-saw works safely and efficiently, it is essential that the
cutting components are well-sharpened. Any work on the chain and bar require
specific experience and special tools. For safety purposes, we recommend you
contact your dealer to ensure work is done correctly.
Page 17 Rev 2