6.
OPERATING INSTRUCTIONS
Mount the components very carefully so as not to impair the safety and efficiency
of the machine. If in doubt, contact your dealer.
Unpacking and completing the assembly should be done on a flat and stable
surface, with enough space for moving the machine and its packaging, always
making use of suitable equipment.
The figures mentioned in the text of this manual are found on pages 10 & 11.
6.1.
Machine assembly.
6.1.1.
Disposal of the packaging should be done in accordance with the local regulations in force.
6.1.2.
For safety and transportation reasons, the lithium ion battery (if supplied) is delivered
separately from the machine and partially charged.
6.1.3.
Charge the battery before using the tool following the instructions in the chapter ‘
Charging
the Battery’.
6.2.
Bar and chain mounting.
6.2.1.
Before fitting the bar, make sure the chain brake is not engaged; this is done by pulling the
front hand guard right back towards the body of the machine.
6.2.1.1.
Unscrew the handle (1) and remove the guard to get to the drive sprocket and the
point where the bar is fitted (Fig 1).
6.2.1.2.
Mount the chain in the right direction on the bar. If the tip of the bar has a nose
sprocket, make sure the drive links are correctly inserted in the sprocket rims (Fig. 2).
Always wear heavy-duty gloves when handling the bar and chain. Mount the bar
and chain very carefully so as not to impair the safety and efficiency of the
machine. If in doubt, contact your dealer.
Make sure the battery is not inserted in its housing.
Page 10
Rev 2
Содержание HYC36LI
Страница 1: ......
