Hyundai Coupe Tiburon 2007, Руководство пользователя, Страница: 40 / 487

1
FEATURES OF YOUR HYUNDAI
28
3. Remove the load space cover.
4. Connect the tether strap hook to the
child restraint hook holder and
tighten to secure the seat.
B230E01GK
Front of Vehicle
Load Space Cover
Tether
strap hook
Rear lugguage compartment floor
Child
Restraint
Hook
Holders
B230B02GK-GAT
Using a Child Restraint System
with "Tether Anchorage" Sys-
tem
For small children and babies, the use
of a child seat or infant seat is required.
This child seat or infant seat should be
of appropriate size for the child and
should be installed in accordance with
the manufacturer's instructions. It is
further required that the seat be placed
in the vehicle's rear seat since this can
make an important contribution to
safety. Your vehicle is provided with
two child restraint hook holders for
installing the child seat or infant seat.
HGK264L
Hook Holder
Bolt, Holder (5/16"-22 mm)
Washer, Conical Spring
Holder, Child Restraint Hook
Retainer Washer
B230E03GK-GAT
Securing a Child Restraint Sys-
tem with "Tether Anchorage"
System
Two child restraint hook holders are
located on the rear luggage compart-
ment floor.
Tether Anchor Cover
1. Open the tether anchor cover on the
rear luggage compartment floor.
2. Route the child restraint seat strap
over the seatback.
For vehicles with adjustable head-
rests, route the tether strap under
the headrest and between the head-
rest posts, otherwise route the tether
strap over the top of the seatback.
OGK016230
Child Restraint
Hook Holder