Hyundai Coupe Tiburon 2007, Руководство пользователя

Страница: 376 / 487

2
DRIVING YOUR HYUNDAI
3
TO START THE ENGINE BEFORE STARTING THE
ENGINE
SC030A2-E
Before you start the engine, you should
always:
1. Look around the vehicle to be sure
there are no flat tyres, puddles of oil
or water or other indications of pos-
sible trouble.
2. After entering the car, check to be
sure the parking brake is engaged.
3. Check that all windows, and lights
are clean.
4. Check that the interior and exterior
mirrors are clean and in position.
5. Check your seat, seatback and
head restraint to be sure they are in
their proper positions.
6. Close all the doors.
7. Fasten your seat belt and be sure
that all other occupants have fas-
tened theirs.
8. Turn off all lights and accessories
that are not needed.
9. When you turn the ignition switch to
"ON" check that all appropriate warn-
ing lights are operating and that you
have sufficient fuel.
10.Check the operation of warning
lights and all bulbs when key is in
the "ON" position.
!
WARNING:
Always wear appropriate shoes when
operating your vehicle.
Unsuitable shoes (high heels, ski
boots, etc.) may interfere with your
ability to use the brake and accelera-
tor pedal, and the clutch (Not all
models).
C030A01A-EAT
COMBINATION IGNITION
SWITCH AND STEERING LOCK
o If your Hyundai is equipped with a
manual transaxle, place the gear-
shift lever in neutral and depress the
clutch pedal fully.
o If your Hyundai has an automatic
transaxle, place the selector lever in
"P" (park).
o To start the engine, insert the ignition
key and turn it to the "START" posi-
tion. Release it as soon as the en-
gine starts. Do not hold the key in the
"START" position for more than 15
seconds.
NOTE:
For safety, the engine will not start if
the shift lever is not in "P" or "N"
position (Automatic Transaxle).