manualshive.com logo in svg

Hyundai Coupe Tiburon 2007, Руководство пользователя, Страница: 259 / 487

Поделиться
Скачать
Hyundai Coupe Tiburon 2007 Скачать руководство пользователя страница 259

F1

The information in this Owner's Manual is current at the time of publica-
tion.  However, the right to amend specifications without notice or
obligation to incorporate such amendments into vehicles already pro-
duced is reserved.

This manual applies to all markets and includes descriptions and expla-
nations of optional as well as standard equipment.  As a result, some of
the equipment operating descriptions referred to may not apply to the
particular vehicle with which this manual is supplied.

Please refer to the nearest Hyundai authorised repairer for information
regarding current standard and optional equipment levels.

SA010A1-E

OWNER'S MANUAL

Operation
Maintenance
Specifications

Содержание Coupe Tiburon 2007








































































































































































































































































































































































































































































































Отзывы:

Нет отзывов