FEATURES OF YOUR HYUNDAI
1- 22
B230F01A-AAT
Installation on Rear Seat Center Posi-
tion
Use the center seat belt for the rear seat to
secure the child restraint system as illus-
trated. After installation of the child restraint
system, rock the child seat back and forth,
and side to side to ensure that it is properly
secured by the seat belt.
If the child seat moves, readjust the length of
the seat belt. Then, if equipped, insert the
child restraint tether strap hook into the child
restraint hook holder and tighten to secure the
seat. Always refer to the child restraint system
manufacturer's recommendation before install-
ing the child restraint system in your vehicle.
B230F01A
On center rear seat
Three child restraint hook holders are located
on the rear luggage compartment floor. To
install the child restraint seat, connect the
child restraint tether strap hook to the child
restraint hook holder and tighten to secure the
seat.
Rear luggage compartment floor
B230B01O-1
Anchorage
Front of Vehicle
Tether
Strap Hook
B230C03O-AAT
Installing a Child Restraint Seat with
the "Tether Anchorage" System
For small children and babies, the use of a
child seat or infant seat is strongly recom-
mended and may be required in your state.
This child seat or infant seat should be of
appropriate size for the child and should be
installed in accordance with the manufacturer's
instructions. It is further recommended that
the seat be placed in the vehicle's rear seat
since this can make an important contribution
to safety. Your vehicle is provided with three
child restraint hook holders for installing the
child seat or infant seat.
B230B02O
This symbol indicates the location of user
ready tether anchorage.
Содержание 2002 Santa Fe
Страница 1: ...D R I V I N G IS B E L I E V I N G 2002 ...
