background image

FEATURES OF YOUR HYUNDAI

1- 38

B340D01A-AAT

High-beam Switch

To turn on the headlight high beams, push the
lever forward (away from you). The High Beam
Indicator Light will come on at the same time.
For low beams, pull the lever back toward
you.

B340E01A-AAT

Headlight Flasher

HSM287

To flash the headlights, pull the switch lever
toward you, then release it. The headlights
can be flashed even though the headlight
switch is in the "OFF" position.

To operate the auto light, turn the barrel on
the end of the multi-function switch. If you set
the multi-function switch to "AUTO",  the tail
lights and headlights will be turned automati-
cally on or off according to external illumina-
tion.

B340F01L-GAT

Auto Light (If installed)

HSM294

B340C02L-AAT

Headlight Switch

HSM284

To operate the headlights, turn the barrel on
the end of the multi-function switch. The first
position turns on the parking lights, sidelights,
tail lights and instrument panel lights. The
second position turns on the headlights.

To indicate a lane change, move the lever up
or down to a point where it begins flashing.
The lever will automatically return to the cen-
ter position when released.

Parking light auto cut

If you do not turn the parking lights "OFF"
after driving, the parking lights will automati-
cally shut "OFF" when the driver's door is
opened.
To turn them "ON" again, you must simply
turn the ignition key to the "ON" position.

Содержание 2002 Santa Fe










































































































































































Отзывы: