Hyun Joung System SAVERCALL-3000, Руководство пользователя

Страница: 33 / 79

33
If you want to set “alarm delay time” as 30 seconds:
From the next step, registration will be the same as the above instructions.
*If you input the wrong number, press ‘SOS’ button to return to the setting
menu.
*Alarm delay time will always be counted when you change the mode from
‘Wait mode’ to ‘Alarm away mode’ or ‘Alarm home mode.’
*In case of the below situation, ‘Alarm delay time’ will be counted if
Savercall-3000 detects sensor’s activation under ‘Alarm mode’:
If you assign ‘Door sensor’ or ‘Motion detector’s number as No.1.
*In case of the below situation, ‘Alarm delay time’ will not be counted if it
detects sensor’s activation under ‘Alarm mode’:
If you assign ‘Door sensor’ or ‘Motion detector’s number between
No.2 and No.30
If you press the ‘SOS’ button on main unit or remote controller
If “Fire sensor” has been activated (“Fire sensor” will be activated in
“Wait mode” and “Alarm away mode”, “Alarm home mode”.)
K E Y 3 + 0 + WAIT/SET
Delay time
L C D
=30
VOICE 3, 0, the data is entered.