Hyun Joung System SAVERCALL-3000, Руководство пользователя

Страница: 74 / 79

74
Troubleshooting (Q & A)
Q: What if I forget the password?
A: 1. Turn off main unit.
2. Turn on main unit by pressing WAIT/SET Key. Then you will
enter initial setting mode after ‘Beep’.
Q: What if I don’t want to activate Motion Detector when someone is in?
A: 1. Enter alarm home mode.
2. The range of detection in Alarm Away mode is set from the setting.
3. Refer to Remote Control/Sensor Registration in the manual for the
setting.
Q: Why can’t I receive phone calls?
A: 1. Check that the programmed telephone number is correct.
2. Check that the telephone line is securely connected to the
“LINE” port.
3. Check that the phone (connected to the main unit) is placed correctly.
4. Check that the dialing method is set correctly with the proper type
phone line.
Q: The motion detector is making false alarms.
A: 1. Change the sensor’s location and direction to avoid detecting pets.
2. Check if the sensor is located near an air current source
(ex: near an air conditioner, nearby a window) or a sunny place.
Q: The remote controller doesn’t work.
A: 1. Check remote controller light by pressing button. If light doesn’t work,
change battery.