Hyun Joung System SAVERCALL-3000, Руководство пользователя

Страница: 27 / 79

27
* When registering, user can assign a “Sensor number” to each sensor, so
that the user knows which sensor has been activated in case of intrusion or
fire. “Sensor number” is very useful if you use many sensors.
If you want to assign “remote controller” as no.1 (You can register sensor
number from no.1 to no. 30):
K E Y 1 + WAIT/SET
Remote
L C D
Sensor No=1
VOICE 1, the data is entered.
* User can assign “Sensor number” from 1 to 30. If you input the wrong
number, press “SOS” button to return to the initial setting menu.
If you input wrong key, you will hear the below voice message:
VOICE Please input again.
To confirm sensor you registered, press the three buttons together one more
time. (Remote controller: Press “ALARM”, “OFF”,”SOS” together)
Activate
L C D
Sensor
VOICE Please activate sensor and remote controller.
If you want to assign “remote controller” as sensor no.1:
Remote cont 01
L C D
1=ok 2=change
VOICE
Remote controller, No.1, Press no.1 for selection, press no.2
for change.
If you want to select, press 1key. If you want to change, press 2key.