55
②
Notify the current mode status (The current status is ‘alarm away
mode’)
③
Revive the prerecorded user’s voice message (“This is Hyun Joung
System in Kurodong 197-7, Emergency situation has been activated.”)
④
Guide the menus which can be controlled by the user (Refer to the
below chart for ‘Voice Guided Menu for Alarm Notification Call’.)
⑤
Wait for the user’s choice for 5 seconds.
ⓒ
If user doesn’t press any button, Savercall-3000 will hang up the phone
and attempt to call the next phone number.
ⓓ
If a phone number is busy, or if there is no touch-tone response
(DTMF signal) from a receiver,
SAVERCALL-3000 will attempt to call
the next phone number, and the system will run this process three times.
Voice Guided Menu for Alarm Notification Call
User Function
Voice Guide
Press
Converse via speakerphone
“To speak, press no. 1.”
1
Listen only, mute speakerphone
at the alarmed zone
“To wiretap, press no. 2.”
2
Want to start Siren alarm
“To start Siren, press no. 3.”
3
Enter wait mode
“To enter wait mode, press no. 4.”
4
Have main unit stop dialing the
programmed phone numbers
“To stop all dialing, press no. 8.”
8
To hang up the phone and dial
the next phone number
“To hang up the phone and dial the
next phone number, press no.9.”
9
Hear Voice guidance again
“To hear repeatedly, press no. 0.”
0
Содержание SAVERCALL-3000
Страница 79: ...79 MEMO ...
