58
reason (for example, door open, motion detect, fire, etc.) and the
location referring to the sensor number. Also, you can check which
sensor has been activated sequentially by pressing 0 even during the
“Alarm notification call’ dialing and when other sensors have been
activated. Therefore, you will know the intruder’s route.
•
“Reason for Alarm notification call”: Door sensor, Motion detector,
fire sensor, SOS button of main unit. SOS button of remote controller.
•
“Reason for Alarm notification call” will save up to 5 sequentially, and
the same reason will not be saved repeatedly.
7. To remote control SAVERCALL-3000 via Telephone
①
You can remote control Savercall-3000 via telephone even if you are
outside.
You can perform mode change and listen in & talk to the person who
is inside.
②
To remote control via telephone:
Make a phone call to SAVERCALL-3000.
After you hear “ringer times” which was set, you’ll enter Remote
control mode.
When
Savercall-3000 answers, you will hear: “ding, ding, ding”,
then you will also hear “Please input password.”
Enter 4 digit Password
※
Password should be 4-digit numeric numbers, and Savercall-
3000 will hang up the phone if you input the wrong password
three times.
If password is correct, you will hear voice guide as follows:
Ex) If Savercall-3000 is remote controlled via telephone in ‘alarm
home mode’:
Содержание SAVERCALL-3000
Страница 79: ...79 MEMO ...
