C. Inspect the chain anchors for cracks or worn holes.
Replace chain anchor pins that are damaged or worn.
Replace broken or missing cotter pins.
D. Inspect chains for proper adjustment. Chains
should be equally tight.
Upright (Item 11)
A. Check the welds on the uprights for cracks. Make
sure that all the nuts and bolts are tight.
B. Check the channels for wear or gouging in the ar-
eas of roller contact. Check the rollers for flat spots
or damage.
C. Check the sliding surfaces on the crosshead for
lubrication and wear.
D. Inspect upright latches (if equipped). Lubricate
latches. Replace broken springs or other damaged
parts.
Carriage
A. Check the welds on the carriage for cracks. Make
sure that all nuts and bolts are tight.
B. Check that the rollers and carriage move freely in
the upright channels.
C. Check hydraulic attachments for leaks or damage.
FIGURE 9. CHECKING THE CHAINS
Load Backrest Extension
A. Check the welds for cracks
B. Make sure that all nuts and bolts are tight.
Powershift Transmission
Check the transmission lines and fittings for leaks.
Make sure that fittings and clamps are tight.
CHECKS WITH THE ENGINE
RUNNING
WARNING
Make sure the area around the lift truck
is clear before starting the engine or
making any checks. Proceed carefully.
Check the interlock switches. The engine will start
during the following conditions:
• Oil Clutch Transmission
The “FORWARD and REVERSE” lever must
be in the “NEUTRAL” position.
• Powershift Transmission
The parking brake must be applied or the brake
pedal must be pushed down.
Содержание F003
Страница 1: ...Hyster F003 H2 00J H2 50J H3 00JS Europe Forklift...
Страница 3: ...MAINTENANCE SCHEDULE...
Страница 4: ......