Changing The Hydraulic Oil
A. Put the lift truck on a level surface. Lower the lift
cylinder. Put a drain pan under the lift truck. An addi-
tional drain pan is used to replace the first pan when
the first is full. A container with a 49.2 litre ( 13 gal-
lon) capacity is needed as a reservoir for the used oil.
WARNING
The hydraulic oil can be hot. Be careful
when draining the oil.
B. Put the pan under the drain plug of the hydraulic
tank. Remove the drain plug.
C. When the oil has drained, install the drain plug. Fill
the tank as described in CHECKING THE HY-
DRAULIC OIL.
CHANGING THE GASOLINE FUEL
FILTER
Replace the filter element for gasoline every 2000
hours. See Figure 3.
CHANGING THE FUEL FILTER
FOR LPG
Remove the filter from the filter unit as described in
the LPG SYSTEM.
FIGURE 20. HYDRAULIC OIL FILTER
C. Remove the paper element. Remove the nut from
the bolt in the center. Remove and clean the screen.
D. Install the screen and filter holder. Install the paper
element. Use new gaskets and O-rings and install the
filter bowl and cap. Push on the filter head and install
the 4 screws.
E. Install a new gasket and install filter assembly in
the tank. Tighten the capscrews.
FIGURE 21. LPG SYSTEM
Содержание F003
Страница 1: ...Hyster F003 H2 00J H2 50J H3 00JS Europe Forklift...
Страница 3: ...MAINTENANCE SCHEDULE...
Страница 4: ......