Steambrite Supply
Steambrite Supply
Created on: : Monday 20 September, 2021
>
3. Using the arbor press, press the Crankshaft
through the Bearing (See Figure 17).
WARNING: Special attention should be exercised
when working with retaining rings. Always wear
safety goggles when working with spring or tension-
loaded fasteners or devices.
Figure 17
-9-
4. Remove the first Retaining Ring on the Crankshaft
with a pliers and the second Retaining Ring with a
screwdriver.
5. Press out the back Main Bearing in the same manner
as the front Main Bearing (Refer to Steps 1
through 3).
6. Remove the Slinger Ring by working it off the Shaft.
Reassembly
1. Install the back Main Bearing first. Place the
Bearing on the small opening end of the Main
Bearing Support Tool with the Slinger Ring on top
of the Bearing, and position it on the arbor press.
WARNING: Special attention should be exercised
when working with retaining rings. Always wear
safety goggles when working with spring or tension-
loaded fasteners or devices.
2. Place the Crankshaft in the Bearing and use the
arbor press ram to press the Crankshaft through
the Bearing until the Retaining Ring can be
installed in the second groove of the Crankshaft
(See Figure 18).
NOTE: Make sure the Slinger Ring does not touch
the Cam Bearing on the Crankshaft when installing
Retaining Rings.
3. Install both Retaining Rings on the Crankshaft.
Figure 18
4. Place the Pump Body, Safety Cover side down, on
the arbor press.
5. Place the Crankshaft, Back Bearing down, into the
bearing bore of the Pump Body.
6. Place the Main Bearing Support Tool , large opening
down, over the Crankshaft.
7. Use the arbor press ram to press the Crankshaft
Assembly into the bearing bore of the pump body
until it bottoms out.
8. Place the front Main Bearing on the Crankshaft until
it touches the pump body.
9. Place the smaller opening end of the Main Bearing
Support Tool over the Crankshaft (See Figure 19).
10. Turn the Pump and Main Bearing Support Tool
over so that the Safety Cover side of the pump is
facing up.
Steambrite Supply - 210 662 9000 - [email protected] Page 14/32
