Steambrite Supply
Steambrite Supply
Created on: : Monday 20 September, 2021
>
Model Number: 5321C-D
Hypro 5321C-D Pump Twin Plunger With Chemical Injector Head 1000psi
Manufacturer: Hypro Pumps
Hypro 5321C-D Small Twin Plunger Pump with injector head, 2.2 GPM @ 1000 PSI
@ 1800 RPM, Cast iron pump with base and Buna-N seals, 5/8" OD solid shaft, 1/2"
NPT ports, 190 deg. max. temp., Plunger material: Stainless Steel, 11 lbs.
Receive half price shipping if picking up at SteamBrite Supply
Owners Manual
More stuff: (may not all fit on web page)
Installation, Operation, Repair And Parts Manual
07/06
Description
Series 5300C-X, 5321C, 5322C and 5324C
Small Twin® Piston and Plunger Pumps Form L-0200P
The following special attention notices are used to notify
and advise the user of this product of procedures that
may be dangerous to the user or result in damage to the
product.
NOTE: Notes are used to notify of installation, operation,
or maintenance information that is important
but not safety related.
CAUTION: Caution is used to indicate the presence
of a hazard, which will or can cause minor injury or
property damage if the notice is ignored.
WARNING: Warning denotes that a potential hazard
exists and indicates procedures that must be followed
exactly to either eliminate or reduce the hazard,
and to avoid serious personal injury, or prevent
future safety problems with the product.
DANGER: Danger is used to indicate the presence
of a hazard that will result in severe personal injury,
death, or property damage if the notice is ignored.
Safety Information
SERIES 5321C & 5322C
Cast Iron Small Twin
Plunger Pump
Max. Flow Rate: ........................2.2 gpm
Max. Pressure: ........................1000 psi
Max. Speed: ............................1725 rpm
Ports:................................1/2" NPT inlet
1/2" NPT outlet
Max. Operating Temp.................180o F
SERIES 5300C-X
Cast Iron Small Twin
Steambrite Supply - 210 662 9000 - [email protected] Page 1/32
