Hypertherm HT4001, Инструкция по эксплуатации

Страница: 81 / 270

HT4001 Instruction Manual
4-18
INSTALLATION
POWER SUPPLY CONNECTIONS (CONT.)
12 IHS Interface Cable - PS to IHS
See pages 4-32 through 4-35 for remaining IHS connections.
PS End
IHS End
1X9
8X1
Part No. Length Part No. Length
023859 25 ft (7.5 m) 023862 100 ft (30.5 m)
023860 50 ft (15 m) 023863 150 ft (46 m)
023861 75 ft (23 m) 023864 200 ft (61 m)
PS IHS MODULE DESCRIPTION
END COLOR END
1 Red 1 IHS Complete Signal
4 Black 4 IHS Complete Common
8 Shield Drain
2 Green 2 Upper Limit Switch Signal
5 Black 3 Upper Limit Switch Common
9 Shield 5 Drain
11 Blk 9 AC Power
14 White 8 AC Power
7 Shield AC Drain
7 Key
11 Timer/Counter Cable - PS to Timer/Counter
Pass the timer/counter cable through one of the 2" bushings in the lower rear of the
HT4001 power supply and connect to TB3. TB3 is located on the inside rear wall of the
power supply.
Part No. Length Part No. Length
023789 10 ft (3 m) 023792 75 ft (23 m)
023790 25 ft (7.5 m) 023793 100 ft (30.5 m)
023791 50 ft (15 m) 023794 150 ft (46 m)
PS TB3 TIMER/CNTR DESCRIPTION
END COLOR END
53 Wht 1 Starts & Arc Time
52 Black 2 Starts & Arc Time
8 Drain 3 Drain
50 Red 15 Error Counter
51 Black 16 Error Counter
3 Drain 12 Drain
11X1
PS End
Tmr/Cntr End