Full Outdoor 2+0 XPIC IP Link
Page 37 of 39
Version
1.0
- delayed : [x] [ cmd] run cmd after x seconds, result in 'sh hist del'
- enable : enable setting
- ping : [xx.xx.xx.xx] ping to ip
- quit : quit & logout
- show : system status & config & counters (?)
- ssh : [user] [xx.xx.xx.xx] ssh to ip
- telnet : [xx.xx.xx.xx] telnet to ip
ok
The syntax used in the online help:
[]
required parameter
{}
optional parameter
(?)
the parameter contains a nested parameters. Type ‘?’ a T end of the command to see possible val-
ues and syntax
Some commands allows using the online help also for their parameters:
my_device_NN|#
set rad1
?
- analyzer : [my] start spectrum analyzer (option my means fine analysis around CF)
-
atpc : radio atpc parameters (?)
- down : power-off radio part
…
ok
my_device_NE|#
set rad1 atpc
?
- off : atpc off
- on : atpc on
- rxlevel : min rx level [-74 - 0]
ok
6
Simple Network Mangament Protocol (SNMP)
6.1
Basic SNMP setting
In order to monitor and manage the device with SNMP protocol you have to setup the SNMP daemon in
the device:
1.
Login in the WEB GUI
2.
Navigate to
IP/SNMP
GUI page
3.
Do the appropriate settings. Remember to choose the correct
SNMP Version
and to fill in the
COMMUNITY SETTINGS (SNMPv2) or SNMPv3 credentials
4.
If you require the
Traps
functionality remember to enter the destination IP into the
Trap IP Ad-
dress
fields
www.hypercable.fr www.e-rake.fr