Full Outdoor 2+0 XPIC IP Link
Page 23 of 39
Version
1.0
4.6
Ports Page
4.6.1
Parameters
In respect of management access type, traffic modification (number of independent channels over air) and
the protection / aggregation function preference the user has to select the relevant
Mode
type (see the
Mode settings) before starting any port settings. Each
Mode
uses similar but not identical port configura-
tion scheme. By default the internal ETH switch is divided into four groups. Such setting prevents potential
loops a T connected LAN ports for all
Modes.
The port settings consists of several configuration layers labelled leftmost of the configuration window:
•
PORT CONFIG
◦
Status – status of a port as detected by the device (speed, duplex mode, link, administrative down
status).
◦
Hot Standby – automatic switch over between ports according to actual link status. (Hot standby
function (not yet implemented)
◦
Mode – This drop-down menu displays and defines the actual port mode (speed/duplex, adminis-
trative down)
◦
MDIX – It is possible to set particular ETH cable crossing like auto/mdi/mdx by means of this config-
uration
Figure XY: Port parameters, Aggregation Mode
www.hypercable.fr www.e-rake.fr