Full Outdoor 2+0 XPIC IP Link
Page 13 of 39
Version
1.0
After
pressing
the button there are multiple possible results depending on active user
connections:
No other active management connections or anoth-
er ‘admin’, ‘user’ or ‘guest’ user logged in
•
the CLI/SNMP with inactive ‘enable’ mode
The main page will be displayed
Another ‘guest’ user logged in
•
the WEB GUI
Another ‘admin’ or ‘user’ user logged in:
•
the WEB GUI
•
the CLI/SNMP with active ‘enable’ mode
A warning will be displayed with option to take over
the management connection. The other connected
user will be disconnected.
After successful connection the main GUI page will appear.
3.2
General system configurations
User settings
The user account settings can be done in the
General/User
GUI section. There are three possible roles:
ad-
min
,
user
and
test
each with their own set of privileges.
It is possible to alter the default
Login Names
and
Passwords
. The device does not support adding another
user defined user accounts.
Device name and description
It is recommended to conclusively define the device and link descriptions. The device identifiers can be de-
fined in the
General/Info
GUI section.
See the possible identifier configurations in the Info section of this document.
Device date and time settings
The date and time settings is located in the WEB GUI section
General/Date
. It is possible to set the
Date
,
Time
and
Time Zone
manually or to define a remote time synchronization server. It is possible to use three
remote time synchronisation protocols:
•
ntp
•
ntpds
•
rdate
If a remote time synchronisation server is defined and alive the device will automatically adjust its time pa-
rameters during boot and once per 24 hours.
www.hypercable.fr www.e-rake.fr