Full Outdoor 2+0 XPIC IP Link
Page 22 of 39
Version
1.0
•
thrHi - MSE threshold for switching to higher Rx modulation
Please note that the ACM settings of local and remote devices should match.
4.5.5
Advanced
This section provides various options for advanced radio and modem part settings:
RADIO ADVANCED SETTINGS
•
Radio Filter
◦
auto – Filter is selected automatically according to the modulation BW (default)
◦
narrow – Manual selection of narrow radio filter
◦
wide – Manual selection of wide radio filter
•
Radio Power Supply – by this option you can turn off the powering into the radio part
MODEM ADVANCED SETTINGS
•
Modem Signal Type – Specification of modulation output. It is possible to replace standard modu-
lated signal with carrier signal (CW) in this drop-down menu. The possible modes follows:
◦
qam – TxIF modulated signal is presented a T IF output from the device (default)
◦
cw – Carrier signal with given frequency is presented a T IF output
•
CW Frequency – carrier signal frequency settings
4.5.6
Details
This section provides summary of basic and advanced modem and radio parameters. These values are col-
lected directly from respective parts and reflects the actual state of such parts. Description of listed param-
eters is out of scope of this document.
www.hypercable.fr www.e-rake.fr