Full Outdoor 2+0 XPIC IP Link
Page 30 of 39
Version
1.0
•
FTP/USB Server – when „usb” is written into this box, the USB port is used as destination/source in-
terface for backup and/or restoration of device’s configuration. When “ftp://IP/directory_structure/” is in-
serted into the box, an external FTP server is used as destination/source address for backup and/or restora-
tion of device’s configuration and license/firmware upgrades. For secured FTP you can use syntax
“ftp://user:password@IP/directory_structure/”
4.8
Count Page
Sections of the Count Page provides detailed overview of the system conditions.
4.8.1
Basic/BER
MODEM COUNTERS
•
FEC RX Blocks – the overall number of received air frames
•
FEC Corrected Blocks – the number of air-frames which were repaired by FEC (Forward Error Cor-
rection). This number represents a fragment of the
FEC RX Blocks
•
FEC Uncorrected Errors – the number of air-frames which could not be repaired by FEC. This num-
ber represents a fragment of the
FEC RX Blocks
•
Uncorrected – Last Second – the number of air-frames which could not be repaired during the last
second
•
FEC Global Rate – the ratio of
FEC Uncorrected Errors
/
FEC RX Blocks
•
FEC Actual Rate – same as above but for latest second only
•
Uncorrected TLE – time since last error; number of seconds from the last error occurrence. It should
correspond to the time since pressing the CLEAR button
•
Uncorrected TBE – time between last two error events
•
Uncorrected EFS – error free seconds; it should correspond to time since pressing the CLEAR button
•
Uncorrected ERS – error seconds; number of seconds during which errors occurred
STATISTICS - BIT ERROR RATE (BER)
This frame provides the built-in BER tester results. Please note that only unassigned capacity will be used
for BER tester.
•
Status – BER tester synchronisation status (sync|nosync) or n/a when there is no active link to the
remote side or free capacity left for the BER tester
•
Actual Tx Speed – shows reserved transmission speed for BER tester. This value roughly equals to
half of the unassigned capacity which is used for the BER tester
•
TX Pattern – shows transmission pattern for BER tester frames
•
RX Pattern – shows receiving pattern of BER tester frames
•
Rx Bit Count – shows number of received bits (BER)
•
RX Err Count - shows number of received error bits (BER)
www.hypercable.fr www.e-rake.fr