Hydrotechnik MultiSystem 4070 Скачать руководство пользователя страница 133

Страница: 133 / 153

Firmware Version 2.0

MultiSystem 4070

133

Instrument functions

ENG

Viscosity-compensated volume flow rate
measurement

The oil viscosity depends on its temperature. To account for these variations
during the measurement of the volume flow, the following channels must be
correspondingly programmed:

•

One measurement channel for temperature (if the viscosity of the oil is not
known)

•

One measurement channel for the viscosity-compensated volume flow
rate measurement

•

If the viscosity is to be displayed/saved, a virtual channel for the calcula-
tion of the viscosity

Sensor

For the viscosity-compensated measurement of the volume flow, you will re-
quire a suitable turbine volume flow sensor with ISDS function (example:

HySense

QT 600

). Use the integrated test point for the temperature

measurement.

SAVE

Stores the current sensor parameters in the database.

Confirms input/saves changes.

The dialogs and functions described here are only available when a suitable tur-
bine volume flow sensor is connected to the measuring instrument.

Содержание MultiSystem 4070


























































































































































Результаты поиска

Содержание MultiSystem 4070

Отзывы:

Hydrotechnik MultiSystem 4070, Руководство по эксплуатации, Страница: 133 / 153

Результаты поиска

Содержание MultiSystem 4070

Отзывы: