Hydrotechnik MultiSystem 4070, Руководство по эксплуатации, Страница: 110 / 153

Firmware Version 2.0 MultiSystem 4070
110
Operating software
ENG
Trigger mode Define the trigger:
• INACTIVE
The trigger is not enabled
• CHANNEL
Definition of a measurement channel as trigger
• KEY
Triggering at the press of a key
• TIMER
Definition of a trigger time
 Definition of a measurement channel as trigger
1 For the Trigger mode , select the CHANNEL option.
2 Open the Trigger condition dialog entry and highlight the desired option.
Then press .
• GREATER : Actuation when trigger value is exceeded
• LOWER : Actuation when trigger value has fallen below
• RISING : Actuation when trigger value has fallen below by more than
5% and then exceeded, “rising edge”
• FALLING : Actuation when trigger value is exceeded by more than 5%
and has then fallen below, “falling edge”
3 Enter trigger value .
4 Confirm changes and exit the dialog:

 Definition of a trigger time
1 For the Trigger mode , select the TIMER option.
2 Enter the date of the trigger time – .
3 Enter the time of day of the trigger time – .
4 Confirm changes and exit the dialog:
