12
Programming Levels
There are 3 levels to the valve program. Master options and Factory options are typically adjusted at the fac-
tory. These options link the PCB function with the type of control valve and should not be tampered with.
Advanced options are used to configure the unit when the valve is assembled to the tank so that it can func-
tion as the proper size and intended system operation. Settings are the final options chosen when the unit is
installed to a specific location.
Button Configuration
Key Pad Configuration
MENU
This function is to enter the basic set up information required at the time of installation.
SET
This function is to accept the values if changed and advance to the next page in the menu.
+ / -
These buttons are used to increase or decrease the value of the settings while in the pro-
gramming mode.
Main Display Options
The main display page shows the Flow Rate, Date, Time Of Day, Remaining Volume, and Total Volume. The
display will alternate between the main page and the dealer information page.
PROGRAM LEVEL
USER ACCESS
MAIN MENU (II)
These settings are programmed when the unit is installed. The settings should only be adjusted by a quali-
fied person.
ADVANCED MENU (II)
These settings are programmed by the factory and should be adjusted when the valve is assembled into a
unit or system. It contains important settings so the valve will operate properly for the type of system it is
intended for. The settings should only be changed by qualified person.
HISTORY MENU (IV)
This menu contains key diagnostics for trouble shooting the system.
USER SETTINGS(I)
These settings are programmed when the unit is installed. The settings should only be adjusted by a quali-
fied person.
FACTORY MENU (V)
These settings are programmed by the factory. The settings are important for the operation of the valve
that should only be changed by a qualified person.
Flow Rate: 24.5 GPM
18-Apr-2015 10:35AM
Remain: 1,280 GAL
Capacity: 1,500 GAL
+
-
MENU
SET
Содержание 89BM-100
Страница 9: ...9 Filter Installation ...