P a g e
23 | 38
1.4. Messages and Indications
Main alarm indicated via display and BMS relay
Display and relay show normal operation
1.4.1.
“Max. lifetime – replace lamp”
Possible reason:
•
Lamp lifetime is exceeded
Display is flashing red/yellow -> relay indicate normal operation
Meaning:
•
Replace the lamp and reset the “service counter”.
•
Dirty Sleeve and sensor or low intensity / no intensity.
1.4.2. Pre-alarm and main alarm is shown
•
Display with green backlight and yellow flashing (pre alarm)
•
Display with red backlight and yellow flashing (main alarm)
Содержание HYDROWELL Compact 10E
Страница 16: ...P a g e 16 38 Reactor Dimensional drawing with parameters from technical data sheet...
Страница 18: ...P a g e 18 38 Control Box Power switch ON OFF UV monitor Cable fittings...
Страница 30: ...P a g e 30 38 Appendices 1 Installation Schematic UV Disinfection System...
Страница 31: ...P a g e 31 38 Appendices 2 Wiring diagram HydroWELL 2 E 5 E and 10 E with sensor...
