Page 24
autocut 5-20l user manual edItIon I 2014-05-23
7.3 Daily maintenance
1. remove cutting residue from the cutting chamber (right hand side door)
2. clean the measuring wheel using a steel brush.
3. check the condition of the driving belts and cutting blade.
4. check tension of belts (see 8.2).
7.4 Weekly maintenance
1. lubricate the measuring wheel- and driving belt cylinder using a greasing gun.
2. clean the motor guide shafts.
7.5 Recommended spare parts AutoCut 5-20L
90090103 - cutting blade hsm 400x4x50, smooth Ih (for ptfe/steel outer braided hose)
90090104 - cutting blade hsm 400x4x50, smooth
90090105 - cutting blade hsm 400x4x50, toothed
90800350 - belt linatex, 700mm (std) 2 pcs/ machine
90800351 - belt linatril, 700mm (oil resistant) 2 pcs/ machine
90010483 - Wheel for measuring unit
90190257 - encoder 3600 pulses/rev
HYDROSCAND MACHINE AB
Kungsvägen 22
Phone: +46 (0)225 - 57 330
S-783 35 Säter
Fax:
+46 (0)225 - 50 108
Sweden
Web:
www.hydroscand-machine.se
MANUAL -E
Page 24
8.3 Daily maintenance
1. Remove cutting residue from the cutting chamber (right hand side door)
2. Clean the measuring wheel using a steel brush.
3. Check the condition of the driving belts and cutting blade.
4. Check tension of belts (see 8.2).
8.4 Weekly maintenance
1. Lubricate the measuring wheel- and driving belt cylinder using a greasing gun.
2. Clean the motor guide shafts.
Lubricate points on the measuring wheel cylinder.
Lubricate points on the driving belt cylinder.
Motor guide shaft
