2
FCC ID: 2AHQR-10850A IC ID: 21247-10850A
FCC: This product has been tested and found to comply with FCC part 15 subpart C. Operation is
subject to the following two conditions: (1) this device may not cause Harmful interference, and (2)
this device must accept any interference received, including interference that may cause undesired
operation of the device. However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on. The user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
Warning: Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Industry Canada
This Device complies with Industry Canada License-exempt RSS standard(s). Operation is subject
to the following two conditions: 1) this device may not cause interference, and 2) this device must
accept any interference, including interference that may cause undesired operation of the device
under Industry Canada regulations.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit
pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Warning: FCC and IC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
The antenna(s) used for this equipment must be installed to provide a separation distance of at least
8 inches (20 cm) from all persons.
Cet équipement est conforme à l’exposition aux radiations de FCC et d’Industrie Canada établies
pour un environnement non contrôlé. L’antenne (s) utilisé pour cet équipement doit être installé pour
fournir une distance d’au moins 20 cm à partir de toutes les personnes.
WARNING
To avoid serious personal injury and damage to the equipment:
It is your responsibility to ensure that this control is safely installed according to all
applicable codes and standards. Hydrolevel is not responsible for damages resulting
from improper installation and/or maintenance.
• Read manual and all product labels BEFORE using the equipment. Do not use unless
you know the safe and proper operation of this equipment.
• Keep this manual available for easy access by all users.
• Replacement manuals are available at hydrolevel.com
• Disconnect all power before opening the control.
• Do not attempt to service the control. There are no user serviceable parts inside the
control. Attempting to do so voids warranty.
This product is packaged with two AA lithium metal batteries and must be transported in
accordance with all relevant and international regulations. Contact your freight company for more
information. Hydrolevel is not responsible for damages resulting from improper transportation,
installation and/or maintenance.
This symbol identifies practices, actions, or failure to act which could result in
property damage or damage to the equipment.
