3
STEP 1 – INSTALL RECEIVER
When choosing the location for the
receiver unit, consider the following:
• Interior wall.
• Keep dry. Avoid potential leakage onto the unit.
• Relative humidity less than 90%. Non-condensing environment.
• No exposure to extreme temperatures beyond 32° to 122°F (0° - 50°C).
• Away from equipment, appliances, or other sources of electrical interference.
• Easy access for wiring.
• Approximately 5 feet (1.5 m) off the finished floor.
Grasp the front cover by the fingertip grips on the top and
bottom of the enclosure and pull the front cover off.
The enclosure is either mounted flush onto a wall or it can
be placed onto a 2" x 4" non-conductive electrical box. The
mounting holes in the enclosure accept #6 screws. Wiring to
the control enters the wiring chamber through the back or
bottom of the enclosure.
