104
fi g. 7.56
fi g. 7.57
fi g. 7.58
fi g. 7.59
7 - A
CCESSORIES
Weather Protection
The weather protection system can increase work effi ciency by protecting workers, material
and equipment against adverse climatic conditions. A structure using a combination of steel
and wood allows users to fasten tarpaulins quickly. A lower structure can also be installed
to cover up to 7' (2,1 m) of wall underneath the platform as an additional protection against
cold weather conditions. The weight of the weather protection structure and its accessories
must be deducted from the load capacities of the setup. Refer to the
Load Capacities
section on p. 80 for more information.
1
-
With the motorized unit at base level, slide a bottom support assembly under the
motorized unit or the bridge (fi g. 7.57). Hook the clamp-end tubes (fi g. 7.56) on the
deck.
2-
Slide a taper pin from right to left in each clamp-end tube and secure in place
with a hitch pin clip. Secure each grip end tube to the deck by tightening the bolt at
the bottom (fi g. 7.57).
3-
Install as many bottom support assemblies as is required by the setup. The distance
between two bottom supports must not exceed 8' (2,4 m).
Installation of the bottom support structure
Installation of the top support structure
(optional)
Taper pin
Bolt
Bottom support
assembly
Distance between supports
must not exceed 8' (2,4 m)
1
-
Insert a vertical post into the rear bottom support bracket (fi g. 7.60, p. 105). The
diagonal brace on the vertical post must be turned
toward
the face of the work
(fi g. 7.61, p. 105).
Clamp-end
tube
