Hydro International Hydro-Logic Flexi Logger 300Ex, Руководство пользователя

Страница: 58 / 74

Hydro-Logic
®
Flexi Logger 300Ex
User Manual
22 August 2018 Page 58 of 74
Hysteresis
This is used to prevent multiple alarms if the sensor value is near the set point.
This parameter is shown as a grey bar on the plot:
The temperature must rise above 23 degrees to trigger the alarm but fall below
22 degrees before the logger checks-in with a return-to-normal event.
The Alpha field can be used to provide some noise reduction in special
circumstances but should normally be left as 0.
Timeview alarm configuration
Provided the logger is transferring data to Timeview correctly, there is no more
alarm setup required on the logger.
Once you have configured alarms on the logger , trigger a dial-out to Timeview
so that the logger alarm configuration information is transferred. See Connecting
to Timeview .