Hydro International Hydro-Logic Flexi Logger 300Ex, Руководство пользователя

Страница: 57 / 74

Hydro-Logic
®
Flexi Logger 300Ex
User Manual
22 August 2018 Page 57 of 74
Push the dial-out button (yellow flash) to trigger a call. After the logger LED goes
back to a 2s blue flash, refresh the page on your browser. The clock error
message should be cleared.
Alarms
As well as the regular calls to transfer data, alarms can be configured on the
Hydro-Logic
®
Flexi Logger so that certain site conditions are detected and trigger
a data transfer to the telemetry server. Alarm information from site is then
forwarded from Timeview to individuals or groups.
Harvest software is used for configuring alarms. There is also some setup
required on Timeview.
Both the logger and Timeview configuration must be
correct for alarms to work properly.
Logger alarm configuration
The Alarms check box (1) is on the sensor tab:
Once selected, you get the alarm config box:
Set point and alarm condition
There are up to 4 alarms for every channel. The Alarm Condition field sets how
the logger should react when the Set Point is crossed. Here, we want the logger
to contact Timeview whenever the temperature exceeds 23 degrees, and when it
returns to normal.